FreeCAD News

, , ,

FreeCAD Version 1.1 Released

Published by

Jo Hinchliffe

on

After an enor­mous amount of work and ded­i­ca­tion from FreeCAD con­trib­u­tors we are delight­ed to announce that FreeCAD Ver­sion 1.1 is now released and avail­able for down­load.

There are sig­nif­i­cant amounts of improve­ments and new fea­tures. These include; trans­par­ent Part Design pre­views, inter­ac­tive drag­gers added to tools like Fil­let and Cham­fer, 3 point light­ing, a Clar­i­fy Selec­tion tool, Assem­bly and FEM improve­ments and ani­ma­tions, a total­ly new CAM tool library sys­tem and much much more.

For a full list of changes and new fea­tures check out the Release Notes and if you want to sup­port the ongo­ing devel­op­ment of FreeCAD then do con­sid­er mak­ing a dona­tion!

 

 

 

 

Discover more from FreeCAD News

Subscribe to get the latest posts sent to your email.

16 responses to “FreeCAD Version 1.1 Released”

  1. Joe Beach Avatar
    Joe Beach

    Fan­tas­tic! Thank you to all of the contributors!

    Reply
  2. noisily2cbc8649b8 Avatar
    noisily2cbc8649b8

    Absolute­ly incred­i­ble work. A huge thank you to the entire devel­op­ment team! I just made a dona­tion, which is the only way I can think of to help.
    Now, a request for ver­sion 1.2: please resume devel­op­ment of the GD&T work­bench (https://github.com/juanvanyo/FreeCAD-GDT), which was a tool with incred­i­ble poten­tial, as it allowed you to spec­i­fy man­u­fac­tur­ing require­ments with­out hav­ing to gen­er­ate a 2D drawing…

    Reply
  3. Paul Magyar Avatar
    Paul Magyar

    Had a quick play on lat­est release and its great thanks to all who have made this I love it

    Reply
  4. Dennis W Hubert Avatar
    Dennis W Hubert

    curves work­bench is miss­ing! I need curves for surfacing

    Reply
    1. Christian Höhn Avatar
      Christian Höhn

      I think you can add this via Addon Manager.

      Reply
  5. douyarou Avatar
    douyarou

    Great job on that video, C. Rogers! Very impressive.

    Great job on FreeCAD as well, Dev Team. You guys are great!

    Reply
  6. Dennis Hunt Avatar
    Dennis Hunt

    What a won­der­ful job by a team of ded­i­cat­ed contributors.

    Reply
  7. toremato23 Avatar
    toremato23

    per­fect. devs are amaiz­ing thx !!!

    Reply
    1. Jo Hinchliffe Avatar
      Jo Hinchliffe

      Agreed!

      Reply
  8. Выпуск свободных САПР FreeCAD 1.1 и SolveSpace 3.2 — AllUNIX.ru — Всероссийский портал о UNIX-системах

    […] года разработки опубликован релиз открытой системы параметрического […]

    Reply
  9. futuristicallyjellyfishf2ceae76b8 Avatar
    futuristicallyjellyfishf2ceae76b8

    thanks

    Reply
  10. Rilasciato FreeCAD 1.1: Supporto Wayland migliorato, nuovi strumenti e molto altro - Aggregatore GNU/Linux e dintorni

    […] Per con­sultare il reg­istro delle mod­i­fiche com­ple­to e sco­prire tut­ti i det­tagli tec­ni­ci, è pos­si­bile vis­itare la pag­i­na ded­i­ca­ta alle note di rilas­cio. L’annuncio uffi­ciale del­la nuo­va ver­sione è disponi­bile sul blog di FreeCAD. […]

    Reply
  11. Dermot Jones Avatar
    Dermot Jones

    Fan­tas­tic work — con­grat­u­la­tions to the Devs and wider sup­port team

    Reply
  12. Quill Avatar
    Quill

    This feels like ter­ri­ble news … for Autodesk, Das­sault, PTC, and so on. Been using the 1.1RC3 and the improve­ments are phe­nom­e­nal. I’ve been using FreeCad for maybe 3 years now, start­ing I think with 0.18. More than 20 years of devel­op­ment had pro­duced some­thing func­tion­al-ish, very dif­fi­cult and frus­trat­ing to use. 1.0 was a huge improve­ment, as the num­ber sug­gest­ed was real­ly gen­er­al-use-ready, ready to actu­al­ly start dis­plac­ing com­mer­cial CAD. I expect­ed after that big years-in-the-mak­ing release, 1.1 would be some minor tweaks (huge improve­ments wait­ing for an even­tu­al 2.0). But no, this is a major step up. Progress on FreeCad isn’t just mov­ing; it’s accel­er­at­ing. Has reached the crit­i­cal point where it’s pop­u­lar­i­ty, and hence invest­ment in fur­ther devel­op­ment, is grow­ing. Excit­ed to see what is still to come!

    Reply
  13. Elo Kjerside Avatar
    Elo Kjerside

    Any update on the flathub version?

    Reply
  14. RD s Avatar
    RD s

    Excel­lent work by all vol­un­teers. Thank you for all the hard, this has been long await­ed release that puts FreeCAD anoth­er step clos­er to being an indus­try stan­dard tool.

    Reply

Leave a Reply to Выпуск свободных САПР FreeCAD 1.1 и SolveSpace 3.2 — AllUNIX.ru — Всероссийский портал о UNIX-системахCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent posts

Discover more from FreeCAD News

Subscribe now to keep reading and get access to the full archive.

Continue reading